SHOP

Showing 1–10 of 41 results

  • “L” Economy Mast Mount

    $24.99

    “L” Economy Mast Mount

    $24.99

    “L” Economy stainless steel mast mount for GPS times antennas.
    This mount is used in conjunction with the timing reference antennas depending on where you’re mounting the actual antenna. Mount will fit masts up to 2″ OD.

    In stock

    Add to cart
    Quick View
  • 2.5″ PoE Clock Rack Ear Set

    $14.95

    2.5″ PoE Clock Rack Ear Set

    $14.95

    These black metal mounting brackets will allow you to install the 2.5″ TimeMachines poe or wifi clocks into a standard 19″ rack.

    In stock

    Add to cart
    Quick View
  • COAX-SEAL #104

    $8.99

    COAX-SEAL #104

    $8.99

    – Seals Coax fittings from moisture and corrosion.
    – Stays flexible at any temperature.
    – Fast and easy seal for all antenna connections.
    – Forms and seals over odd shapes

    In stock

    Add to cart
    Quick View
  • Collar Mount for GPS Timing Antennas

    $24.99

    Collar Mount for GPS Timing Antennas

    $24.99

    This mount is used in conjunction with the timing reference antennas depending on were you are mounting the actual antenna.

    In stock

    Add to cart
    Quick View
  • Double rack mount for gps time server

    Double Rack Mount for Time Servers

    $69.99

    Double Rack Mount for Time Servers

    $69.99

    The TimeMachines Double Server Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. Use the Double mount to hold two servers to provide network time redundancy. These are sized to fit both the TM1000A and the TM2000A servers that we offer. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate sits flush with the front of the blank. Basic assembly consists of 4 screws attached to your rack, and 8 screws to attach the time server to the rack mounts themselves.

    View our SINGLE RACK MOUNT!

    In stock

    Add to cart
    Quick View
  • 6 digital wall clock pipe accessory

    Dual Clock Mount Bracket – 2.5″ x 4 or 6 Digit Clocks

    $39.95

    Dual Clock Mount Bracket – 2.5″ x 4 or 6 Digit Clocks

    $39.95

    Use this bracket when you want to mount 2 clocks back to back. The bracket has a 3/4″ NPT threaded fitting that accepts pipe found at local hardware stores. Buy the bracket and then buy pipe locally to make your own custom installation. This product can be used for either a 4 digit clock or the 6 digit clock.

    In stock

    Add to cart
    Quick View
  • 4 digit wall clock mounting system

    Dual Clock Mount Bracket – 4″ x 4 Digit Clocks

    $39.95

    Dual Clock Mount Bracket – 4″ x 4 Digit Clocks

    $39.95

    Use this bracket when you want to mount 2 clocks back to back. The bracket has a 3/4″ NPT threaded fitting that accepts pipe found at local hardware stores. Buy the bracket and then buy pipe locally to make your own custom installation.

    In stock

    Add to cart
    Quick View
  • NTP Time Server with GPS

    GPS NTP Network Time Server (TM1000A)

    Rated 4.91 out of 5
    $299.99

    GPS NTP Network Time Server (TM1000A)

    $299.99

    The TimeMachines GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The TM1000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronization is lost across the network. The unit is compact and can be placed anywhere within the network layout, even using our new time server rack mounts. The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed. Setup and use of this time server is straightforward. Simply connect both the included power supply and the GPS antenna to the base unit and then connect the base unit to the local network. Go to a computer on the network and browse to the device at its default web address to enter the software setup within the control box. Set parameters to match your network and the system will start to send out time packets to any device on the system that asks for an update from it. When paired with our digital Power Over Ethernet (PoE) clocks, synchronized time is assured no matter the state of your network, or the state of the internet time server the clocks are pointed to. Accuracy is improved because the network delay of the internet is highly variable, while the local LAN connection is likely a sub-millisecond delay. TimeMachine GPS NTP time servers are suited to any application where coordination of events at multiple locations is required. Used by education, industrial facilities, military installations, public safety command rooms, government, broadcasting, and hospitals. Supports IPv4 and IPv6.

    Included with EACH TM1000A purchase:

    1 Power Supply, 1 Antenna, 1 Quick Set-up Guide


    Extended Warranty Pricing/Details
    * NOT available for International Orders *

    In stock

    Add to cart
    Quick View
  • GPS NTP+PTP Network Time Server (TM2000A)

    Rated 3.00 out of 5
    $499.99

    GPS NTP+PTP Network Time Server (TM2000A)

    $499.99

    * This version is NOT compatible with the Verizon eFemto products. See www.css-design.com for more information.

    The TimeMachines GPS NTP+PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection. The TM2000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time. The unit is small and can be placed anywhere within the network layout. The built in high sensitivity GPS receiver is able to lock multiple satellites from within many buildings or from a window location, removing the requirement that outdoor antennas be installed in many applications. Outdoor antennas are available from TimeMachines including custom length cables and accessories.

    To learn more about our GPS NTP and PTP time servers, give us a call today.

    Included with EACH TM2000A purchase:

    1 Power Supply, 1 Antenna, 1 Quick Set-up Guide


    Extended Warranty Pricing/Details
    * NOT available for International Orders *

    In stock (can be backordered)

    Add to cart
    Quick View
  • GPS antenna

    GPS Patch Antenna

    $24.95

    GPS Patch Antenna

    $24.95

    A GPS Patch Antenna enabling the highest quality signal for your time server.

    In stock

    Add to cart
    Quick View

TM1000A WARRANTY

time servers / wifi poe clocks