PTP + NTP Time Servers with GPS | WiFi & PoE Digital Clocks
                  (402) 261-8688 x. 214  |  MY ACCOUNT  |  CHECKOUT  |  

GPS NTP Network Time Server (TM1000A)

4.90 out of 5 based on 10 customer ratings
(10 customer reviews)

$299.99

gsa contract time servers and wifi clocks

* Now available on GSA Contract and GSA Advantage.
* Now available on amazon.co.uk / .de / .it / .es / .fr
* EU orders ship more quickly AND free with Amazon Prime.

The TimeMachines GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronization is lost across the network. The unit is compact and can be placed anywhere within the network layout, even using our new time server rack mounts. The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed. Setup and use of this time server is straightforward. Simply connect both the included power supply and the GPS antenna to the base unit and then connect the base unit to the local network. Go to a computer on the network and browse to the device at its default web address to enter the software setup within the control box. Set parameters to match your network and the system will start to send out time packets to any device on the system that asks for an update from it. When paired with our digital Power Over Ethernet (PoE) clocks, synchronized time is assured no matter the state of your network, or the state of the internet time server the clocks are pointed to. Accuracy is improved because the network delay of the internet is highly variable, while the local LAN connection is likely a sub-millisecond delay. TimeMachine GPS based time servers are suited to any application where coordination of events at multiple locations is required. Used by education, industrial facilities, military installations, public safety command rooms, government, broadcasting, and hospitals. Supports IPv4 and Ipv6.

Included with EACH TM1000A purchase:

1 Power Supply, 1 Antenna, 1 Quick Set-up Guide


Extended Warranty Pricing/Details
* NOT available for International Orders *

In stock

Warranty Options

SKU: 760-1000-000 Category:
5% Discount when ordering 5-9 of this item.
10% Discount when ordering 10-14 of this item.

Description

TM1000A Quick Setup Guide

TM1000A Manual

TM1000A Brochure


Buy affordable NTP/PTP Time Servers and PoE/WiFi Digital Clocks
TimeMachines5 star based on 6 reviews
299.99 New

Additional information

Weight 2 lbs
Dimensions 8 x 6 x 4 in

10 reviews for GPS NTP Network Time Server (TM1000A)

  1. 5 out of 5

    This is great, I use it to improve telescope pointing accuracy over multiple night sessions. Had some technical questions and support couldn’t have been better. Very very happy.

  2. 5 out of 5

    I’ve been looking for a time source for my home / business network at a price that wouldn’t break the bank. This is it! Not only has it worked flawlessly for the past six months for my network which contains a number of networked hardware devices that need accurate time but with the use of port redirection and a dynamic DNS service, I’ve been able to provide a rock solid time source to several of my friend’s networks that I manage for them.

  3. 5 out of 5

    Simple device that works as advertised. Easy installation about 10 min. So far seems compatible with all our devices that need time sync. Including Windows and Unix based operating systems.

  4. 5 out of 5

    simple, cheap, and Great…….

  5. 5 out of 5

    Apart from already being a stratum 1 NTP server out of the box, its serial NMEA and 1PPS output allows you to ‘discipline’ another computer clock with great accuracy.

  6. 5 out of 5

    Industrial Control Systems often cannot be connected to the internet for security reasons, and this is a perfect solution for that problem. The product has worked flawlessly for us, and was simple to setup and configure. A great value for a Stratum 1 timeserver… You really ought to consider becoming market partners with the major control systems suppliers (Emerson, Honeywell, etc.).

  7. 5 out of 5

    (verified owner)

    This is the perfect solution for the small to mid sized business that requires an accurate time clock. Even large businesses could deploy a few of these and do well with them. The unit is easy to set up and start using. It has all the important features you can think of including external antenna jack and serial port. The price is right as well, and they have plenty of accessories available to complete a professional installation.

  8. 5 out of 5

    Very easy-to-use device that works great out of the box. I needed a Stratum 1 time server that syncs all computers on my network to within 1 ms, and the TM1000A fits the bill perfectly.

  9. 4 out of 5

    This is a good entry-level NTP source. I have used ours for over 2 years and made some discoveries about the operation. It is not good as the only NTP source on your network, the reason is that if it loses satellites, or power and is just coming on line, it will give a very wrong date value. I had an APC UPS management card pointed to the device and when it went offline the UPS would report dates in 2032 or some such. (APC is part to blame here) This device is better used to discipline a computer clock that can keep decent time on it’s own. I also wish the GUI would give the time in UTC or whatever when it is refreshed. Even with these minor caveats the TM1000A is a good, inexpensive GPS NTP time source to keep times in sync with the rest of the world.

  10. 5 out of 5

    I have been looking for an affordable solution for time syncing our servers for some time now, and the TM1000A seems to fit the bill quite well. It locked onto GPS within 2 minutes of plugging in. I’m a happy camper!
    The only thing I would change is being able to factory reset the device without having to take the front plate off. I haven’t needed to do this yet, but having a reset button (like most every other device out there) is such a a simple thing to design into the product… well, nothing is perfect.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • single rack mount for gps time servers

    Single Rack Mount for Time Servers

    $59.99
    single rack mount for gps time servers

    Single Rack Mount for Time Servers

    $59.99

    The TimeMachines Single Server Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. Use this mount to mount a single time server. It is sized to fit both the TM1000A and the TM2000A time servers that we offer. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate sits flush with the front of the blank. Basic assembly consists of 4 screws attached to your rack, and 4 screws to attach the time server to the rack mounts themselves.

    View our DOUBLE RACK MOUNT!

    In stock

    Add to cart
  • ntp ptp time server

    GPS NTP+PTP Network Time Server (TM2000A)

    3.00 out of 5
    $499.99

    GPS NTP+PTP Network Time Server (TM2000A)

    $499.99

    gsa contract time servers and wifi clocks

    * Now available on GSA Contract and GSA Advantage.
    * Now available on amazon.co.uk / .de / .it / .es / .fr
    * EU orders ship more quickly AND free with Amazon Prime.

    The TimeMachines GPS NTP+PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection. The system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time. The unit is small and can be placed anywhere within the network layout. The built in high sensitivity GPS receiver is able to lock multiple satellites from within many buildings or from a window location, removing the requirement that outdoor antennas be installed in many applications. Outdoor antennas are available from TimeMachines including custom length cables and accessories.

    Included with EACH TM2000A purchase:

    1 Power Supply, 1 Antenna, 1 Quick Set-up Guide


    Extended Warranty Pricing/Details
    * NOT available for International Orders *

    In stock

    Warranty Options

    Add to cart
  • timing reference antennas

    Timing Antenna + Amplifier

    $169.99
    timing reference antennas

    Timing Antenna + Amplifier

    $169.99

    The timing reference antennas are specifically designed for long-lasting, trouble-free deployments in congested cell-site applications as well as broadband and WiMAX networks. The proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas. Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. 1575 MHz Micropulse GPS Reference Antenna. 4.5 dBic with N Female connector. Antenna incorporates a 40 dB low noise amplifier gain. Hardware not included.

    – Dimensions: 7.5″ x 4.4″ x 3.8″.
    – Connector: N, female (one – bottom fed).
    – Works with TimeMachines TM1000A GPS NTP Server and TM2000A GPS PTP Server.
    – Outdoor Use

    In stock

    Add to cart
  • Double rack mount for gps time server

    Double Rack Mount for Time Servers

    $69.99
    Double rack mount for gps time server

    Double Rack Mount for Time Servers

    $69.99

    The TimeMachines Double Server Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. Use the Double mount to hold two servers to provide network time redundancy. These are sized to fit both the TM1000A and the TM2000A servers that we offer. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate sits flush with the front of the blank. Basic assembly consists of 4 screws attached to your rack, and 8 screws to attach the time server to the rack mounts themselves.

    View our SINGLE RACK MOUNT!

    In stock

    Add to cart

TM1000A WARRANTY

time servers / wifi poe clocks